Belt conveyor system
 |
Details:
Fixed belt conveyor is a kind of conveying equipment with large conveying capacity, low operation cost and wide application range. This machine is suitable for conveying bulk materials or pieces of materials. According to the requirements of conveying technology, it can be transported by single machine, or it can be combined with other conveying (feeding) equipment to form a horizontal or inclined conveying system.
Delivery capacity: 10 ~ 3000 t/h
Bandwidth: B400～B2200
Applicable materials: all kinds of powder, granule and small block materials
Contact Us
| Belt Width | Up to 2.4m |
| Belt Length | 3,000m + |
| Capacity | > 8,000 m?/h |
| Belt speed | Up to 6.0m/s |
| Max Incline | Maximum 25? |
| Drive Type | Motorized pulley | Geared motor unit | Motor+fluid coupling+gear box |
| Belt Options | Antistatic| Fire resistant | Oil resistant | Hard wearing | corrosion resistant |
| Tension Unit | Below 100m – screw type tail tension unit | Above 100m - gravity tension unit or car type tension unit |
| Protection Switches | Speed switch | Belt Sway Switches | Pull-cord switch | Blockage sensor |
| Construction Materials | Conveyor case and internals - stainless or coated mild steel | Conveyor support structure - galvanised mild steel |
| Conveyed Materials | Wet or dry bulky materials in the form of crumbs, grains, pellets, shreds, dust, powder, flake, or crushed products of bio-matter, sludge and aggregate. |
|
|
|
|
| Coal conveying system of power plant | Port storage yard transfer conveying system | Raw material conveying system of steel mill |
|
|
|
| Open-pit mine conveying system | Bulk conveying system for cement plant | Sand-gravel aggregate conveying system |
|
|
|
Project name: 200,000-ton ore berth project of Dandong Port |
Project name: Long distance belt conveyor is used for lignite transportation in opencast coal mine Material name: Lignite Handling capacity: 2,200t/h Belt width: 1,600mm Belt length: 1,562m Belt speed: 2.5m/s Installation angle: -6°~+4° |
|
|
|
Project name: Heat-resistant belt conveyors are used to transport clinker in cement plants |
Project name: Overland belt conveyor is used to transport coal for coal-fired power plant Material name: Fuel coal Handling capacity: 1,200t/h Belt width: 1,400mm Belt length: 3,620m Belt speed: 2.0m/s Installation angle: 0° |
.jpg)
SELECTION INSTRUCTIONS
1.Material to be conveyed:______
2.Handling capacity: ______ t/h
3.Bulk Density:______ t/m3
4.Center distance between the head and tail pulley:______ m
5.Max. granule size of the feeding material:______ mm
6.Max. Granule's percentage in whole material:______ %
7.What equipment is used to feed the material into the belt conveyor :______
8.What equipment is used to discharge the material from the belt conveyor :______
9.Working power supply: ______ V ______ HZ
10.Does the belt conveyor work alone or with other equipment to form a system? If forming a system, do you have preliminary design or hand-drawn sketch? If have,please send it to our engineer for reference.